Hotpoint RGB747GER User Manual Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
PROBLEM SOLVER
(continued)
PROBLEM
STRONG ODOR
OVEN WILL NOT
SELF-CLEAN
OVEN DOOR WILL
NOT UNLOCK
OVEN NOT CLEAN AFTER
CLEAN CYCLE
“door’’APPEARSONDISPLAJ
CONTROLBEEPSAFTER
ENTERINGOVENTIME
ORSTOPTIME
“F’’ANDANUMBER
FLASHONDISPLAY
POSSIBLE CAUSE
Improper air/gas ratio in oven. Adjust oven burner air shutters.
An odor from the insulation around the oven liner is normal for the first few
times the oven is used. This is temporary.
Oven temperature is too high to set self-cleaning operation. Allow the range to
cool to room temperature and reset the controls.
Door latch handle not moved all the way to the right.
Oven must cool below locking temperature (approximately 30 minutes after the
clean cycle is complete). Do not lock door with door latch except when using
self-clean feature or the oven may lock.
Oven controls not set properly. Review Operating the Self-Cleaning Oven section.
Heavily soiled ovens require
3~2
to 4 hour clean time.
Heavy
spillovers
should be cleaned up before starting clean cycle.
Self-cleaning cycle has been selected but latch handle was not moved all the
way to the right. Move the latch handle.
Latch handle was moved to the right but a program other than self-cleaning was
selected. Move the latch handle to the right only when setting self-cleaning cycle.
This is reminding you to enter a bake temperature (see Baking section).
If the time display flashed “F-” and a number, you have a function error code.
If function error code appears during the self-cleaning cycle, check oven door
latch. The latch handle may have been moved, even if only slightly, from the
latched position. Make sure the latch is moved to the right as far as it will go.
Press the
CLEAWOFF pad. Allow oven to cool for one hour. Put oven back
into operation. If the failure code repeats, disconnect all power to the range.
Call for service.
If you need more help... call, toll free:
GE Answer Center
(
800.626.2000
consumer information service
46
Page view 45
1 2 ... 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments