Hotpoint RGB747GER User Manual download pdf (Page 30)

CARE AND CLEANING

(continued)

Oven Air Vents

Never block the vents (air openings) of the range. They provide

the

air

“m~~m

--77>

inlet and outlet that are necessary for the range to operate properly with

--’”

correct combustion. Air openings

are

located at the rear of the

cooktop,

the top and bottom of the oven door, and

the bottom of the range, under

->?=

the storage drawer.

Oven Lamp Replacement

CAUTION: Before replacing your oven bulb,

disconnect electrical power to the range at the

main fuse or circuit breaker panel. Be sure to let

the lamp cover and bulb cool completely.

The oven lamp (bulb) is covered with a removable

glass cover that is held in place with a bail-shaped

wire. Remove oven door, if desired, to reach cover

easily.

To remove:

1. Hold hand under cover

it doesn’t

fall

when

released. With fingers

of same hand, firmly push

back wire bail until it clears cover. Lift off cover.

DO NOT REMOVE ANY SCREWS TO

REMOVE COVER.

2. Do not touch hot bulb with

wet cloth. Replace

bulb with

40-watt household appliance bulb.

replace cover:

Place it

into groove

lamp receptacle. Pull wire

bail forward to center of cover until it snaps into

place.

When in place, wire holds cover firmly. Be

certain wire bail is in depression in center

of cover.

2. Connect electrical power to the range.

Metal Parts

Glass Surfaces

Do not use steel wool, abrasives,

ammonia or commercial oven

cleaners. To safely clean surfaces;

wash, rinse and then dry with a

@’

-:.,

.:<:

“>,;

soft cloth.

. . . . . . .

To clean the outside

glass

finish, use a glass

cleaner. Rinse and polish

with a dry cloth. Do not

allow the water or

cleaner to run down

inside openings in the

glass

while

cleaning.

--&.&

1’

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Comments to this Manuals

No comments

Hotpoint RGB747GER User Manual Page 30

Comments to this Manuals

Related products and manuals for Cookers Hotpoint RGB747GER