99
en
INTRODUCTION
Thank you for purchasing our Multicyclonic
vacuum cleaner handstick. In doing so you
have opted for an effective, high performance
appliance. We advise you to register this
product on www.hotpoint.co.uk to make
sure you are entitled to all the benets made
available by Hotpoint Customer Service.
The Multicyclonic vacuum is designed combining
efciency and ergonomy. They new high efciency motors
ensure optimal performances with low consumption.
BEFORE FIRST USE
Assembling (A, B)
1. Place the motorized brush (1) on the ground
according to the direction in the gure (A), and
t it by clipping it on the lower part of the main
body (5). Note the voltage indicated on the back
of the brush connector (2) is the same voltage
indicated on the back of the main body. Note to
remove the motorized brush, press the brush
release button (35) on the back and remove the
main body vertically according to the gure (A).
2. To remove the dustbin assembly (7), press the
dustbin release button (6) and pull out it.
3. Holding the metal handle in the battery pack (31),
t the battery pack vertically into the battery pack
housing (32). Note the battery voltage indicated on
the label should be the same as indicated on the back
of the main body. Disassembly in the reverse order.
4. Keeping the dustbin handle (8), t the dustbin
assembly in position until it clicks according to
the gure (A).
5. Fit the hose handle (19) into the main body until it
clicks into place (B). To remove the handle, press
the handle release button (36) and pull it out.
6. Fasten the plastic exible hose (26) to the
suction inlet (33) until it clicks into place, same
as the picture. To remove it, press the plastic
exible hose release (27) and pull it out. Place
the plastic exible hose on the clamp (17).
7. Place the two-in-one accessory (25) in the handle
slide clamp (18), same as in the picture (B).
If your appliance is equipped with a Remote Power
Control, you will need to insert the batteries (see paragraph
“Remote Power Control” under chapter “Features”).
CHARGING THE BATTERY (C)
The charging time is 2 or 4 hours, depending on the model.
Please ensure the battery pack is installed in the
Vacuum cleaner before charging. Use only the original
charger supplied with the appliance.
1. Connect the charger in the back of the main
body, opening the lid for charging (34) and plug
the charger into the mains.
DESCRIPTION OF THE VACUUM
CLEANER
1. Motorized brush*
2. Motorized brush connector*
3. Brush roll cover*
4. Ultraviolet light*
5. Main body
6. Dustbin release button
7. Dustbin assembly
8. Dustbin handle
9. Filter cover
10. Hepa lter
11. Motor cover
12. Upper multicyclone
13. Multicyclonic lter
14. Lower multicyclone
15. Dustbin container
16. Dustbin lid
17. Clamp
18. Handle slide clamp
19. Hose handle
20. Handle grip
21. Remote Power control*
22. Standby button*
23. Buttons - for electronic power adjustment*
24. Buttons + for electronic power adjustment*
25. Two-in-one accessory * (Precision nozzle/
Nozzle for delicate surfaces)
26. Plastic exible hose
27. Plastic exible hose release
28. Battery compartment*
29. Suction selector on the accessory position*
30. Suction selector on the brush position*
31. Battery pack*
32. Battery pack housing*
33. Suction inlet
34. Lid for charging*
35. Brush release button
36. Handle release button
37. Start/Stop button
38. Electronic power regulator*
39. 4LEDs*
40. Standby indicator*
41. Battery indicator*
42. Control power indicator*
43. Filter cleaning indicator*
44. Charger
* on some models only
(8 pages)
(24 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals