Hotpoint HS MR 2A ZU B Instruction for Use download pdf (Page 11)

1111

with an horizontal surface, the UV light is switched off.

To replace the UV light, please contact the nearest

Authorised Service Centre.

Hepa lter

This model comprises the Hepa lter. The Hepa lter

ensures maximum protection against allergens and high

air quality, because the air given back by the appliance is

entirely free from dust/powder residues.

CLEANING AND MAINTENANCE

Before cleaning or maintaining the vacuum cleaner,

make sure it has been unplugged from the electrical

outlet. Do not use aggressive substances or abrasive

materials to clean the appliance, its internal parts and

attachments. Use a dry or slightly damp soft cloth for

cleaning. Make sure the appliance and all its parts are

thoroughly dry before restarting the appliance. We

suggest to clean the lter at least every 6 months to

restore its ltering power. In any case we recommend

replacing the lter at least every year to ensure

maximum performance. Always operate the vacuum

cleaner with the lter installed.

Cleaning the dustbin

For the routine cleaning of the dustbin (G):

1. Press the dustbin release button (6) and take out

the dustbin assembly (7).

2. Keep the dustbin assembly in vertical position

with the lid facing down.

3. Press the lock on the dustbin lid (16) to open the

dustbin container (15).

4. Empty the dustbin.

5. Close the dustbin lid until it clicks into place and

replace it into the main body.

For the washing of dustbin container to remove any

residual dirt (G,H):

1. Before washing the dustbin container, make sure

it has been emptied.

2. Align the screw on the back of the motor cover

(11) with the unblock mark on the dustbin (15) to

open the dustbin, turn the upper dustbin same as

the picture (G).

3. Take out the multicyclonic lter (13).

4. Take out the lower multicyclone (14) from dustbin contai-

ner, holding the metal handle same as the picture (H2).

5. Remove any residual dirt by washing the dustbin

container under running water.

6. Let it dry at room temperature until its parts are

thoroughly dry.

7. Assembly in the reverse order the lower mul-

ticyclone and the lter.

8. Align the screw on the back of the motor cover

(11) with the blocked mark on the dustbin to clo-

se the dustbin, turning the upper dustbin same

as the picture (G).

9. When the screw on the back of the motor cover

(11) and the blocked mark on the dustbin are li-

ned up completely, the dustbin is correctly tted.

10. Replace the dustbin assembly into the main body.

Cleaning the lters (H)

To clean the Hepa lter (10):

1. Open the lter cover (9) using the lever of the

handle on the dustbin same as the picture (H3).

2. Remove the Hepa lter turning it in the direction

indicated on the lter (H4).

3. Wash the lter under running water, taking care

that the jet of water is not too strong.

4. Hold it so that the water ows parallel to its folds.

5. Let it dry at room temperature until all of its parts

are thoroughly dry.

6. Re-place the Hepa lter and assembly in the

reverse order.

To clean the Multicyclonic lter (13):

1. Align the screw on the back of the motor cover (11) with

the unblock mark on the dustbin (15) to open the dustbin,

turning the upper dustbin same as the picture (G).

2. Take out the Multicyclonic lter (13).

3. Clean the lter by washing it under running water,

taking care that the jet of water is not too strong.

4. Let it dry at room temperature until its parts are

thoroughly dry.

5. Fit the lter into the special housing inside the

dustbin container.

6. Close the dustbin container in the reverse order.

Cleaning the motorized brush (I)

Before cleaning or maintaining the Motorized brush of

the vacuum cleaner, make sure it has been unplug-

ged from electrical outlet. Always disconnect the Mo-

torized brush before cleaning it.

1. Open the brush roll cover locking (3) by un-

screwing the two screws.

2. Remove the roll cover accordingly the direction

in the gure (I).

3. Remove the roll out of the notch for cleaning.

Avoid cleaning with water.

4. Reassembly in the reverse order.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Hotpoint HS MR 2A ZU B Instruction for Use Page 11

Comments to this Manuals

Related products and manuals for Unknown Hotpoint HS MR 2A ZU B