Hotpoint BS61 MK2 User Manual download pdf (Page 33)

WARNING: THIS APPLIANCE MUST BE EARTHED.

(a) The oven unit is designed for mounting at a safe level into an oven housing

which must be secured to the backing wall, or alternatively, in the case of the

single oven unit, under a worktop with or without a hob unit above.

(b) In an oven/hob arrangement where it is proposed to install the oven directly

below the hob. It is advisable that only slimline hobs are used which have the

following maximum depths.

It is most important that the hob installation instructions are strictly observed.

INSTALLATION INSTRUCTIONS

This equipment is designed specifically for domestic purposes and Hotpoint

Limited cannot accept responsibility if used in any other type of installation.

This appliance must not be installed over any appliance that generates heat.

For your own safety, we recommend that your appliance is installed by a

competent person – such as one who is registered with NICEIC (National

Inspection Council for Electrical Installation Contracting). The cooker should be

installed in accordance with the latest Edition of the IEE Regulations.

IMPORTANT

1. GENERAL

Kitchen Worktop thickness

30mm

40mm

40mm +

Maximum hob depth

(from worktop surface vertically down)

55mm

65mm

Worktop thickness + 25mm

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

No comments

Hotpoint BS61 MK2 User Manual Page 33