Hotpoint WMTL80 User Manual download pdf (Page 16)

Removing and Cleaning the

Detergent Compartment

Note: It is advisable to clean the detergent compartment

regularly. To do this:

Emptying the Pump Chamber

Your machine comes equipped with a self cleaning pump that does not require any cleaning or

maintenance. Small objects may accidentally fall into the pump: coins, hair clips, loose buttons and

other small items. To avoid possible damage they are held in an accessible chamber situated at the

lower end of the pump.

To access the pump chamber:

Replace the syphon

tubes and relocate into

the lid, ensuring it clicks

into place.

WARNING

●

Do not clean any part

of your appliance with

abrasive cleaners,

scouring agents, acids,

chlorine based bleach

or metal polish as they

may cause damage.

IMPORTANT

●

Disconnect from the

electricity supply

before cleaning as well

as carrying out any

type of maintenance

procedure.

Open the external lid

completely. Press the

dispenser release button

and slide the dispenser

upwards to remove

Remove the pair of

syphon tubes.

Rinse all parts under the

tap, using an old tooth-

brush (take care to remove

any excess water remaining

inside the compartment)

Use only soap and water for

cleaning the surfaces.

Use only a cloth moistened with

water when cleaning plastic parts,

(control panels, plinth etc.)

Cleaning

Lift the cover, rotating it

anti-clockwise.

Remove any items in the

chamber.

Remove the front

plinth at the bottom of

the washing machine.

It is usual for a little water to come out after removing the cover.

When replacing the front plinth, make sure you insert the hooks

in their slots at the bottom right hand side of the machine

before pushing it back into position.

Cleaning the

Exterior

Fig. 1

Fig. 2

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Hotpoint WMTL80 User Manual Page 16

Comments to this Manuals

Related products and manuals for Washers Hotpoint WMTL80