Hotpoint WMTL80 User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
IMPORTANT INFORMATION: The temperature of the incoming water supply or selection of wash
options will affect programme times.
Choosing a Wash Programme
Hotpoint recommend the
Persil range of detergent
products
12
IMPORTANT:
To cancel the wash
programme you
have just set, select
one of the
symbols
(Stop/Reset) and
wait for at least 5
seconds.
Sort the laundry according
to the wash care labels, the
degree of soiling and the
weight (maximum weight -
see next page)
Close all zips and remove
items from pockets
Loading the machine:
Lift the external lid and
open it completely. Press
the release button on the
front drum flap and grasp
the rear flap that lifts up to
open the drum.
WARNING: Release hold on
flaps slowly and carefully
as they are fitted with
strong springs.
Place the laundry in the
drum loosely for best
results, if possible combine
large and small items. An
overloaded drum will give
unsatisfactory wash results.
Take care that no items fall
outside the drum.
Also ensure,no items are
trapped between the two
flaps.
Type of fabric, dirt degree - Always observe the treatment advice of the fabric manufacturer
COTTONS
Heavily soiled whites
Heavily soiled whites
A
90˚B
90˚
150
130
130
115
60˚
40˚
C
D
Prewash, Main wash 90˚,rinse cycles, intermediate and
final spin cycles
Main wash 40˚, rinse cycles, intermediate and final spin
cycles
Rinse cycles, intermediate and final spin cycles
Main wash 60˚, rinse cycles, intermediate and final spin
cycles
Main wash 90˚, rinse cycles, intermediate and final spin
cycles
Draining and final spin cycle
Interrupts / Cancels the selected programme
Heavily soiled whites
Normally soiled whites
Rinse cycles
Spin cycle
Stop / Reset
Description of washing cycle
Programme
Selection
knob ‘A
Temperature
Control
knob ‘B’
Detergent for
main washing
Fabric
Conditioner
Minutes
*Duration
Main wash 30˚, rinse cycles, anti-crease or draining
Rinse cycles, anti-crease or draining
Silk, particularly delicate
garments and fabrics
Rinse cycles
Rinse Hold
Draining
Interrupts / Cancels the selected programme
Draining
Stop / Reset
Start is delayed by 12 - 9 - 3 - 1 hours
Interrupts / Cancels the selected programme
12hr - 9hr - 3hr - 1hr delay
Stop / Reset
SYNTHETICS
DELICATES
PROGRAMMED START
White Nylon
Acrylics
E
40˚G
60˚
30˚
H
Main wash 60˚, rinse cycles, anti-crease or delicate spin
cycle
Draining and delicate spin cycle
Rinse hold for silk and especially delicate items.
Main wash 30˚, rinse cycles, anti-crease or delicate spin
cycle
Main wash 40˚, rinse cycles, anti-crease or delicate spin
cycle
Rinse cycles, anti-crease or delicate spin cycle
Interrupts / Cancels the selected programme
Quick Wash
Rinse cycles
Spin cycle
Rinse Hold
Stop / Reset
Rinse cycles with automatic introduction of softener,
anti-crease or delicate spin cycle
Fabric softener
105
Heavily soiled colourfast
synthetics
F
50˚
Main wash 50˚, rinse cycles, anti-crease or delicate spin
cycle
85
Wool
J
40˚
Draining and delicate spin cycle (wool)
Spin cycle
Main wash 40˚, rinse cycles and delicate spin cycle
55
K
N
30˚
Detergent for
pre-wash
Rinse hold for silk and especially delicate items.
45
75
30
QUICK WASH PROGRAMME: Programme H - a 30 minute wash at 30˚ for delicate synthetics - your machine has programme
designed to wash lightly soiled items in a short amount of time. By setting programme H at a temperature of 30˚, you can wash
different fabrics together (except for woollen and silk items), with a maximum load of 3kg. This programme allows you to save on both
time and and energy as it only lasts approximately 30 minutes. We recommend that you use liquid detergent and pour it into the wash
compartment of the detergent dispenser.
Use programme B with a temperature of 60˚C and without any buttons selected for the IEC 456 test.
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments