Hotpoint SL B18 AA0 UK Instruction for Use download pdf (Page 10)

1010

Cleaning the lters (L)

model without dust bag

ThismodelcomprisestwoPureCleanHepa13lters.

The Pure Clean Hepa 13 lter ensures maximum

protection against allergens and high air quality,

because the air given back by the appliance is entirely

free from dust/powder residues (ltering power >

99.95%).

To clean the Pure Clean Hepa 13 lter (30) in the

back:

1. Disassemble the air grill (31) using the opening

tab.

2. Remove the Pure Clean Hepa 13 lter by

releasing the opening tab.

3. Washthelterunderrunningwater,takingcare

that the jet of water is not too strong.

4. Holditsothatthewaterowsparalleltoitsfolds.

5. Let it dry at room temperature until all of it’s parts

are thoroughly dry.

6. Re-placethePureCleanHepa13lter,paying

attention to the positions of the notches.

7. Fit the air grill into its housing until it clicks into

place.

Tocleanthedustcompartmentlters(38):

8. Press the dust-compartment opening button (13)

to open the dust compartment (14).

9. Remove the dust container (39).

10. Release the opening tab and then remove the

PureCleanHepa13lter,pre-lter(41)andlter

protection grill (40).

11. Whencleaningthelterprotectiongrill,remove

any dust/powder residues with a small brush. If

needed, use a damp soft cloth.

12. Cleanthepre-lterbywashingitunderrunning

water, taking care that the jet of water is not too

strong. Allow to dry.

13. Wash the Pure Clean Hepa 13 lter under

running water, taking care that the jet of water is

not too strong.

14. Holditsothatthewaterowsparalleltoitsfolds.

15. Let it dry at room temperature until all its parts

are thoroughly dry.

16. Fitthepre-lterintothespecialindentationofthe

PureCleanHepa13lter,lockingbothltersin

place using the protection grill.

17. Fit the pre-lter, Pure Clean Hepa 13 lter

and protection grille assembly onto the dust

container, paying attention to the positions of the

notches, until it clicks into place.

18. Re-place the dust container into the dust

compartment.

tab.

2. Remove the Pure Clean Hepa 13 lter by

releasing the opening tab.

3. Washthelterunderrunningwater,takingcare

that the jet of water is not too strong.

4. Holditsothatthewaterowsparalleltoitsfolds.

5. Let it dry at room temperature until all its parts

are thoroughly dry.

6. Replace the Pure Clean Hepa 13 lter, paying

attention to the position of the notches.

7. Fit the air grill into its housing until it clicks into

place.

Tocleanthedustcompartmentlters(38):

8. Press the dust-compartment opening button (13)

to open the dust compartment lid (14).

9. Remove the Pure Clean dust bag (34), motor

ltergrill(36)andmotorlter(35)fromthemotor

ltergrill.

10. Cleanthemotorlterbywashingitunderrunning

water, taking care that the jet of water is not too

strong. Then gently shake water loose.

11. When cleaning the motor lter grill, remove

any dust/powder residues with a small brush. If

needed, use a damp soft cloth.

12. Fitthemotorlterintothemotorltergrillagain,

taking care to position it gently into the special

notches.

13. Slide the motor lter grill assembly into the

special guides in the dust compartment.

14. Fit the Pure Clean dust bag using the special dust

bag support.

15. Close the dust compartment lid until it clicks into

place.

Cleaning the dust container (I)

model without dust bag

For the routine cleaning of the dust container:

1. Press the dust-compartment opening button (13)

to open the dust compartment (14) and remove

the dust container (39).

2. Open the lid and empty the dust container.

3. Remove any residual dirt by washing the dust

container under running water.

4. Let it dry at room temperature until all its parts

are thoroughly dry.

5. Close the dust container lid until it clicks into

place and replace it into the dust compartment.

6. Close the dust compartment lid until it clicks into

place.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Hotpoint SL B18 AA0 UK Instruction for Use Page 10

Comments to this Manuals