Hotpoint MWH 253 B Instruction for Use Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
PAUSE OR STOP COOKING
To pause cooking:
The cooking can be paused to check, add or
turn or stir the food by opening the door.
The function will be stopped if to press STOP
button during cooking.
The setting will be maintained for 5 minutes.
To continue cooking:
Close the door and press the Jet Start but-
ton. The cooking is resumed from where it was
paused.
If you don’t want to continue cooking you
can: Remove the food, close the door and
press the Stop button.
When the cooking is finished: The display
will show the text “End. An acoustic beep will
signal once a minute for 2 minutes.
Please note that reducing or stopping this pro-
grammed cooling cycle will not have a negative
impact on the function of the product.
ADD / STIR / TURN FOOD
DepenDing on the selecteD function, it could be
needed to add / stir / turn food during cooking.
In these cases the oven will pause cooking and
it will ask you to perform the needed action.
When required, you should:
* Open the door.
* Add or Stir or Turn the food (depending on
the required action).
* Close the door and restart by pressing Jet
Start button.
Notes: if the door is not opened within 2 minutes
from the request to Add or Stir or Turn the food,
the microwave oven will continue the cooking
process (in this case the final result may not be
the optimal one).
i
CLOCK
to set the clock of your appliance:
1. In standby, press the Auto Clean button for 3
seconds. The display shows the current clock.
2. Press + / - to set the hour.
3. Press Clock/JET START button to conrm.
4. Press + / - to set the minute.
5. Press Clock/JET START to conrm the setting.
AUTO CLEAN
this automatic cleaning cycle will help you to to
clean the microwave oven cavity and to remove
unpleasant odors.
• Before starting the cycle:
1. Put 300ml water into a container (see our rec-
ommendations in the below section “Tips and
suggestions).
2. Place the container directly on the middle of
the cavity.
When The Cycle Is Finished:
1. Press the Stop button.
2. Remove the container.
3. Use a soft cloth or a paper towel with mild de-
tergent to clean the interior surfaces.
To Start The Cycle:
1. Press the Auto Clean button, the cleaning cycle
duration will be visible on the display.
2. Press the Jet Start button to start the function.
Tips and suggestions:
• For a better cleaning result, it is recommended to
use a container with a diameter of 17-20cm, and a
height that is lower than 6.5cm.
• It is recommended to use a container of light
plastic material that is suitable for the microwave.
• As the container will be hot after the cleaning
cycle is completed, it is recommended to use a
heat resistant glove when removing the container
from the microwave.
• For a better cleaning effect and removal of un-
pleasant odors, add some lemon juice or vinegar
to the water.
• The Grill element does not need cleaning since
the intense heat will burn off any splashes, but
the space around it may need regular cleaning.
This should be done with a soft and damp cloth
with mild detergent.
• If the Grill is not used regularly, it should be run
for 10 minutes a month to burn off any splashes,
in order to reduce the risk of fire.
hotpoint.co.uk
77
en
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments