Hotpoint SI E40 BA1 UK Instruction for Use download pdf (Page 15)

1515

• The soleplate temperature may be too low due to the excessively

frequent activation of the shot of steam button. Slightly increase the

interval between steam shots.

• The soleplate temperature is set to a too-low temperature.

• You have replaced the iron horizontally without emptying it and/or

without setting the steam regulator to Off.

• Youdidnotclosethelidofthellerholecorrectly.

• You have used the shot of steam function with a too-low temperature.

We recommend to use these functions with temperatures higher

than .

• You are using perfume, vinegar, starch, vinegar, starch, scale-

removing agents, ironing products or other chemical substances.

Remember that these substances may damage the product. Rinse

the water reservoir.

• You are using a too-high temperature. Clean the soleplate (see

chapter “Cleaning and maintenance”, section “Cleaning”).

• You are using starch. You can use starch directly on the inside out of

the fabrics and in any case never in the water reservoir.

• The garment was not washed correctly or has some soap residues.

• Youareironinganewgarmentthatwasnotwashedforthersttime.

• Not enough water in the water reservoir. Fill the water reservoir.

Water is dripping out of the

soleplate

The soleplate is dirty or dark

and may stain the fabrics

The spray function does not

work.

1 2 ... 10 11 12 13 14 15 16

No comments

Hotpoint SI E40 BA1 UK Instruction for Use Page 15