Hotpoint GF760RX Instruction for Use Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
Congratualtions on choosing an Hotpoint appliance, which you will find is dependable and easy to use. We recommend
that you read this manual for best performance and to extend the life of your appliance. Thank you.
Close-up View
D
F
F Safety Device - Activates if the flame accidentally goes
out (spills, drafts, etc.), interrupting the delivery of gas
to the burner.
A Gas Burners
B Support Grid for Cookware
C Control Knobs for Gas Burners
D Ignitor for Gas Burners
A
B
C
How To Use Your Appliance
The position of the corresponding gas burner or electric
hot plate (if present) is indicated on each control knob.
Gas Burners
The burners differ in size and power. Choose the most
appropriate one for the diameter of the cookware being
used.
The burner can be regulated with the corresonding control
knob by using one of the following settings:
Off
High
Low
To turn on one of the burners, place a lighted match or
lighter near the burner, press the knob all the way in and
turn it anti-clockwise to the "High" setting.
On those models fitted with a safety device (F), the
knob must be pressed in for about 4 seconds until the
device that keeps the flame lit warms up.
To light the selected burner, first press the corresponding
knob down fully, turn it anti-clockwise to the high flame
symbol, and keep the knob pressed down until the burner
ignites for approximately 3-4 seconds to allow the safety
device "F", which keeps the flame lit automatically, to
heat up.
To turn off a burner, turn the knob clockwise until it stops
(it should be on the “•” setting).
Caution: If the burner accidently goes out, turn off the gas
on the control knob and wait at least 1 minute before you
try to to light it again.
The section entitled, "Practical Cooking Advice", provides
information on the recommended settings for various types
of food or cooking processes. When the knob is on any of
the settings other than "Off", the operating light comes
on.
A
B
C
Page view 3
1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments