Hotpoint HAE51K Instruction for Use download pdf (Page 15)

Care and Cleaning

Ceramic hob

To reduce the amount of cleaning always ensure that

the hob and cooking utensils are clean and dry

before use. Regular use of cleaner conditioner is

recommended for proper care and protection of the

hob surface. Apply conditioner before using the hob

for the first time. It contains a mild cleaning agent,

so that subsequent applications may clean off soil

and apply a protective film at the same time. For

stubborn stains or heavy soiling use any of the

following materials, and finish off with conditioner.

1. Cif, non-scratch scouring cream.

2. Liquid Gumption Kitchen Cleanser.

3. Special Powder Cleanser.

Powder Cleanser Powder Cleanser

Powder Cleanser – Mineral deposits that are

present in hard water, and some foods, may cause

‘discolourations’ that appear in the form of grey or

brown stains. The stains sometimes appear to be in

or under the glass surface. If there are some

persistent stains after using any of the other

recommended cleaning materials, powder cleanser

may be applied, following the manufacturers

instructions.

Do not Do not

Do not use abrasive cleaners or the powder

cleanser on the painted metal framework.

Cleaner Conditioner Cleaner Conditioner

Cleaner Conditioner – Regular use of the

conditioner will make the surface easier to clean thus

ensuring that years of heavy abrasive cleaning do

not progressively dull the surface.

Grill

Remove the grill pan and the wire grid food support,

it is best to wash these items immediately after use

to prevent stains from being burnt on when used

again. Wipe out the Grill compartment, use a fine

steel wool soap pad to remove stubborn stains from

the grill runners and the floor of the compartment.

Wipe over the control panel with a damp cloth and

polish with a dry cloth.

Control Panel

Do not use Do not use

Do not use cream cleaners, oven cleaners or

aerosols, scouring pads or abrasive powder for

cleaning the plastic knobs as damage will occur.

Decorative Trims

It is advisable to clean the decorative trims regularly

to prevent any build up of soiling. The

recommended method of cleaning is to wipe over

the trims with a soft cloth wrung out in warm water or

mild non-abrasive cleaner. (If in doubt try the cleaner

on a small area of trim which is not noticeable in

normal use). Then, after wiping with a cloth wrung

out in clear water, dry with a soft clean cloth.

Ovens

Remove the rod shelves and grill pan. Use a fine

steel wool soap pad to remove stubborn stains from

the rod shelves, grill pan and the floor of the oven.

Clean the glass part of the oven door using a

sponge and a non-abrasive cleaning product, then

dry thoroughly with a soft cloth. Do not use rough

abrasive material or sharp metal scrapers as these

could scratch the surface and cause the glass to

crack.

Oven Shelf Supports

The shelf supports are removable and dishwasher

safe.

To remove To remove

To remove hold the support at the front and pull

away from the oven side, this can then be cleaned in

a sink or a dishwasher. When removed it allows

access to the oven side, which can be cleaned with

warm soapy water.

To refit To refit

To refit the support, insert the longer leg into the

rear fixing hole and push in the front leg.

Oven Lamp Replacement

Open the oven door and remove the rod shelves.

Using a suitable cloth to protect the fingers grip the

light glass dome, unscrew anti-clockwise and lift.

Reach into the aperture with fingers, and unscrew

the lamp anticlockwise. Fit replacement lamp (25W

300°C rated SES), refit dome.

WARNING: To avoid electric shocks - pleaseWARNING: To avoid electric shocks - please

WARNING: To avoid electric shocks - please

ensure that the electricity supply to theensure that the electricity supply to the

ensure that the electricity supply to the

appliance is switched off and the applianceappliance is switched off and the appliance

appliance is switched off and the appliance

is fully cold, before removing the lamp lens.is fully cold, before removing the lamp lens.

is fully cold, before removing the lamp lens.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Hotpoint HAE51K Instruction for Use Page 15

Comments to this Manuals

Related products and manuals for Unknown Hotpoint HAE51K