Hotpoint HQ9 B1L Instruction for Use download pdf (Page 18)

REFRIGERATOR USE

Opening and Closing Doors

There are two refrigerator compartment doors. The doors can

be opened and closed either separately or together. There is a

vertically hinged seal on left refrigerator door.

■ When left-side door is opened, hinged seal automatically folds

inward so that it is out of the way.

■ When both doors are closed, hinged seal automatically forms

a seal between the two doors.

NOTE: When closing the door, the hinged seal should be in

correct position (be bent inside). Otherwise it will hit the right door

or the xing shaft.

The refrigerator compartment door switch is located in top left

and right hinge cover.

■ For Freezer and Multi Temperature Zone, door switch is

located in bottom mullion.

■ The door switch uses magnet to sense door opening/closing.

■ Ensure there are no magnet or electronic devices (Speaker,

Coolvox

etc.) within 7.62 cm of the hinge cap.

NOTE: The light not turn on if the door opening is not detected.

Ice Maker

■ To make ice, ll ice tray with puried water and place Manual

Ice maker into Freezer top shelf. Allow time till ice gets formed

and once ice is ready, turn the knobs in clockwise direction to

eject ice cubes into the ice container.

■ Lift ice container slightly and pullout ice container to get

access to ice cubes.

Manual ice maker assembly can be taken out of the freezer when

ice is not required to make more compartment in freezer.

A. Hinged seal

A. Hinge cover

21-Apr-2018 01:11:42 EDT | RELEASED

In some European factories the letter "W" of the part code mentioned herein will be automatically

replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Hotpoint HQ9 B1L Instruction for Use Page 18