Hotpoint OV A11 S Instruction for Use download pdf (Page 3)

•

For ovens installed under the worktop, leave a minimum clearance of 5 mm between the upper edge

of the oven and the lower edge of the worktop (fig. 5).

For correct operation of the appliance, this

clearance must always be unobstructed.

•

If the kitchen unit is not securely fixed to the wall, it must be anchored with standard brackets

(A)

(fig. 6).

Electrical connection

Regulations require that the appliance be earthed.

•

Connection to the mains must be carried out by a qualified electrician in accordance with the

manufacturer's instructions and in compliance with local regulations.

•

The installer is responsible for connecting appliances correctly to the mains and for observing the safety

regulations.

•

The oven power cable must be long enough to connect the built-in oven to the mains.

•

Observance of safety directives requires that an accessible mains disconnection device or a multi-pole

switch with a minimum contact gap of 3mm be used for the installation.

•

Do not use multiple plug adapters or extension leads.

•

After the oven has been installed, the electrical components must be inaccessible.

1 2 3 4 5 6 7 8 9 10

No comments

Hotpoint OV A11 S Instruction for Use Page 3