Hotpoint GA2 124 IX User's Guide Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
EN
3
.HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent lm
from the oven and remove any accessories from inside it.
Heat the oven to 250° C for about one hour.
Follow the instructions for setting the function
correctly.
Please note: It is advisable to air the room after using the
appliance for the rst time.
USING THE APPLIANCE FOR THE FIRST TIME
. STARTING THE OVEN
Keeping the oven door closed, push and turn the
adjustment knob to the maximum temperature mark
. Hold the adjustment knob down for a couple
of seconds to make sure that the oven switches on.
The electronic switch-on knob must not be pressed
and held for more than 15 seconds.
To change the temperature, turn the adjustment knob
to the temperature you require.
If you want to stop cooking at any point and switch
the oven off, turn the adjustment knob to the
position.
If the oven fails to switch on or it switches o
accidentally, turn the adjustment knob back to the
position, open the oven door and wait at least
one minute before attempting to switch the oven
on again.
GRILL FUNCTION
For grilling steaks, kebabs and sausages, cooking
vegetables au gratin or toasting bread.
We suggest placing food on the 5th shelf. When
grilling meat, we recommend using a dripping pan to
collect the cooking juices: Position it on the 4th shelf,
adding approx. 200 ml of drinking water.
Preheat the oven for 3-5 minutes. The oven door must
remain closed during cooking.
The roasting spit (if provided) can be used with this
function.
To select the “Grill” function, turn the adjustment
knob to
symbol.
Once the function has started, the LED will light up to
indicate that the function has been activated.
. SETTING THE TIMER
This option does not interrupt or activate cooking but
allows you to use the display as a timer, both while a
function is active and when the oven is off.
To activate the timer, turn the timer knob to the
desired length of time: An audible signal will sound
once the timer has finished counting down the
selected time.
DAILY USE
Page view 2
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments