Hotpoint BS73 BS63 User Manual download pdf (Page 7)

The Controls

The 7 Chefs oven combines the advantages of a convec-

tion oven with those of fan assisted models in a single ap-

pliance.

It is extremely versatile allowing you to choose easily and

safely between 7 different cooking modes. The various fea-

tures offered by the oven are selected by means of the func-

tion selector “B” situated on the control panel.

Setting the digital clock

The time can only be set on the clock when the function

selector “B” is in position 0.

After the appliance has been connected to the power sup-

ply, or after a power failure, the clock display will automati-

cally reset to 0:00 and begin to blink. 0.00.

Press button

to increase or decrease the time.

Upon releasing these buttons, the time set will be memo-

rised, but you still have another 3 seconds to continue your

modification.

Any changes to the time can be made by pressing button

and holding it down, until the time appears back on the

display and then pressing button

. Upon releas-

ing these buttons, the time set will be memorised, and you

still have another 3 seconds to continue your modification.

The oven light

Set the function selector “B” to the 8 symbol to turn it on. It

lights the oven and stays on when any of the electrical heating

elements in the oven come on.

Please remember that once cooking is over, the oven light

will stay on until the function selector “B” is set back to posi-

tion 0 or until the oven has cooled down sufficiently.

Cooking without the Programmer

When function selector “B” is in position 0, temperature con-

trol “C” and buttons

and

are disabled.

Set the function selector “B” to the desired cooking mode

and the recommended cooking temperature will appear on

the display (which is independent from the position of

the temperature control “C”).

If the value offered is not the one you require, you can change

the temperature, 10° at a time, by turning the temperature

control “C”.

Each cooking mode is also associated with a recommended

cooking time, which can be decreased down to 2 min or

increased up to 9h59min, by pressing the

button, fol-

lowed by

and/or

. Upon releasing button

or ,

the cooking time set will be memorised, but you still have

another 3 seconds to continue your modification.

Keep in mind that, in the case of non programmed cooking,

the set cooking time does not include the time required for the

oven to heat up to the appropriate temperature.

Notice: the cooking start will automatically be postponed by

2 minutes when you press the

button. To cancel this

setting, set the function control “B” back to position 0.

To start cooking, press the

: button. for safety reasons, if

you fail to do the above within one minute after you have

set the function control “B”, the word -END will come up on

the display and the buttons will be disabled. To enable the

buttons again, just set the function control “B” back to posi-

tion 0.

Once cooking has started, the oven begins the pre-heating

phase, during which icon

flashes on the display and

the cooking temperature set comes up too.

When it is reached, you will hear three consecutive beeps

and icon

will come on permanently. Now you can place

the food to be cooked inside the pre-heated oven.

Note: The pre-heating phase is not foreseen for the FAST

COOKING and GRILL modes, and the oven will

consequently start cooking immediately after button

pressed.

Please remember that when cooking is under way, you can

always:

• modify the cooking mode (by turning the function control

“B”) without this affecting the temperature and cooking

time set;

• Check the selected temperature by pressing button

• modify the temperature (by turning the temperature control

“C”);

• modify the cooking time (by pressing button

and

hen

to increase or decrease the amount of

time).

• stop it at any time by setting the function selector “B”

back to 0.

When the set cooking time is up, a buzzer will sound, and

will stop doing so after 1 minute or if you press any button

whatsoever. The word -END will appear, the control panel

and the temperature control “C” will be disabled until the

function selector “B” is set to position 0.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

Hotpoint BS73 BS63 User Manual Page 7

Comments to this Manuals

Related products and manuals for Microwaves Hotpoint BS73 BS63