Hotpoint HTU30 User Manual download pdf (Page 10)

Caring for your Cooker Hood

10

Cleaning:

Before doing any cleaning or replacing the

filters or light bulb always check that the

electricity supply to the hood is switched

off.

For your own safety and in the interest of

hygiene your Cooker Hood needs to be kept

clean. A build up of grease or fat from cooking

could cause a fire hazard.

Never use excessive amounts of water when

cleaning,particularly around the control panel

area.

The metal casing and grille assembly should

be cleaned at least once a month to keep it

looking like new. Wipe over with a soft cloth,

wrung out in warm water and dry with a clean

soft cloth. Wear protective gloves.

You can use mild non-abrasive cleaners but

always read the manufacturer’s instructions

first. Always test their suitability on a small

area of the Cooker Hood not noticeable in

normal use.

NOTE: DO NOT use scouring pads or

abrasive cleaners as they may scratch the

surface.

How to replace the light:

Should the light fail to work, switch ‘Off’ the

mains supply to the Hood.

Remove the grille.

First check the bulb is screwed securely into

the bulb holder.

Replacement bulbs are specified 230/240

volts 40watt clear round shape with small

Edison (E14) screw thread cap.

Replace the grille and switch on at the mains

supply.

NOTE: When changing the bulb, an

identical replacement must be fitted to

ensure the safe operation of the hood.

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments