Hotpoint WIC 3B19 User's Guide download pdf (Page 4)

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding

button (see CONTROL PANEL).

HALF LOAD

If there are not many dishes to be washed, a half load

cycle may be used in order to save water, electricity and

detergent. Select the program and press the HALF LOAD

button: the indicator light will light up. Press the HALF

LOAD button to deselect this option.

Remember to halve the amount of detergent.

TABLET (Tab)

This setting allows you to optimize the performance of

the program according to the type of detergent used.

Press the TABLET button (the indicator light will light up)

if you use combined detergents in tablet form (rinse aid,

salt and detergent in 1 dose).

If you use powder or liquid detergent, this option

should be off.

DELAY

The start time of the program may be delayed for a period

of time between 1 and 12 hours.

1.Press the DELAY button: the corresponding symbol

appears on the display; each time you press the button,

the time (1h, 2h, etc. up to max. 12h) from the start of

the selected wash cycle will be increased.

2.Select the wash program and close the door: the timer

will begin counting down;

3.Once this time has elapsed, the indicator light switches

off and the wash cycle begins.

To adjust the delay time and select a shorter period of

time, press the DELAY button. To cancel it, press the

button repeatedly until the selected delayed start

indicator light switches off.

The wash program will start automatically as soon as the

door is shut.

The Delay function cannot be set once a wash cycle

has been started.

If an option is not compatible with the selected program see

PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times

and beeps will sound. The option will not be enabled.

1 2 3 4 5 6 7 8

No comments

Hotpoint WIC 3B19 User's Guide Page 4