Hotpoint HSFE 1B0 C User's Guide download pdf (Page 4)

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times

and beeps will sound. The option will not be enabled.

DELAY

It is possible to delay the start time of the program by 2, 4

or 8 hours:

1. After selecting the desired program and any other options,

press the DELAY button. The indicator light will go on.

2. Select the desired delay time by pressing the DELAY button

repeatedly. The 2 hours, 4 hours and 8 hours indicator lights

will go on in succession. If the DELAY button is pressed

again, the option is deselected and the indicator light

goes o;

3. After the selection process, the countdown will begin if the

START/PAUSE button is pressed. The selected delayperiod

indicator light is on and theSTART/PAUSE button lights up

(xed light).

4. Once this time has elapsed, the DELAY indicator light goes

o and the program begins.

The DELAY function cannot be set once a program has

been started.

DRAIN OUT

To stop and cancel the active cycle, the Drain Out function

can be used.

A long press of START/PAUSE button, will activate the DRAIN

OUT function. The active program will be stopped and the

water in the dishwasher will be drained out.

TABLET (Tab)

This setting allows you to optimize the performance of the

program according to the type of detergent used.

Press the TABLET (the corresponding indicator will light up) if

you use combined detergents in tablet form (rinse aid, salt

and detergent in 1 dose).

If you use powder or liquid detergent, this option should

be o.

1 2 3 4 5 6 7 8

No comments

Hotpoint HSFE 1B0 C User's Guide Page 4