Hotpoint RA720KCT Installation Manual

Browse online or download Installation Manual for Treadmills Hotpoint RA720KCT. Hotpoint RA720KCT Installation Instructions User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
,03257$17³ Save these instructions
for local inspector’s use.
,03257$17³ Observe all
governing codes and ordinances.
Note to Installer – Be sure to leave these
instructions with consumer.
Note to consumer – Keep these
instructions for future reference.
Skill level – Installation of this appliance
requires a qualified installer or electrician.
Proper installation is the responsibility of the
installer.
Product failure due to improper installation is
not covered under warranty.
FOR YOUR SAFETY:
If you did not receive an anti-tip bracket with your purchase,
call 1.800.626.8774 to receive one at no cost. (In Canada,
call 1.800.561.3344.) For installation instructions of the bracket,
visit: www.GEAppliances.com. (In Canada, www.GEAppliances.ca.)
Installation Instructions
Hotpoint Compact Electric Ranges
MATERIALS YOU MAY NEED TOOLS YOU WILL NEED
(UL Listed 40 AMP)
4-Wire Cord 4’ long OR
3-Wire Cord 4’ long
Squeeze Connector
(For Conduit
Installations Only)
1
REMOVE PACKAGING MATERIALS: Failure to remove packaging materials could
result in damage to the appliance. Remove all packing parts from oven, racks, heating elements
and drawer. Also, remove protective film and labels on the outer door, cooktop and control panel.
Drill with 1/8” Bit
Safety Glasses
Adjustable Wrench
Level
Tin Snips
Tape Measure
Pliers
1/4” Nut Driver
A child or adult can tip the range and be killed.
Install the anti-tip bracket to the wall or floor.
Engage the range to the anti-tip bracket by sliding the
range back such that the foot is engaged.
• Re-engage the anti-tip bracket if the range is moved.
• Failure to do so can result in death or serious burns
to children or adults.
Tip-Over Hazard
WARNING
Questions? Call 1.800.GE.CARES (1.800.432.2737) or visit www.GEAppliances.com
In Canada, call 1.800.
561.3344
or visit www.GEAppliances.ca
WARNING
³
Before beginning
the installation, switch power off at service
panel and lock the service disconnecting
means to prevent power from being
switched on accidentally. When the service
disconnecting means cannot be locked,
securely fasten a prominent warning device,
such as a tag,
to the service panel.
2
PREPARE THE OPENING (FOR INDOOR USE ONLY)
See illustrations for all rough-in and spacing dimensions. The range may be placed with 0”
clearance (flush) at the back wall and side walls of the cabinet.
A
NOTE C
B
A
C
Both
Sides
NOTE: Use a 4’ power cord to prevent interference
with the storage drawer. Power cords 4
1
ø
2
’ to 6’ long
may have to be dressed to allow for proper drawer
closing.
MINIMUM DIMENSIONS BETWEEN COOKTOP,
WALLS AND ABOVE THE COOKTOP:
A. Make sure the wall covering, countertop, flooring
and cabinets around the range can withstand the
heat (up to 200°F) generated by the range.
B. Allow 30” minimum clearance between surface
units and bottom of unprotected wood or metal
cabinet, or allow a 24” minimum when bottom
of wood or metal cabinet is protected by no less
than 1/4” thick flame retardant millboard covered
with not less than No 28 MSG sheet metal, (.015”),
.015” thick stainless steel, .024”
aluminum or .020” copper.
C. This appliance has been approved for 0” spacing to adjacent surfaces above the cooktop. However,
a 2” minimum spacing to surfaces less than 15” above the cooktop and adjacent
cabinet is recommended to reduce exposure to steam, grease splatter and heat.
To reduce the risk of burns or fire when reaching over hot surface elements, cabinet storage space
above the cooktop should be avoided. If cabinet storage space is to be provided above
the cooktop, the risk can be reduced by installing a range hood that projects at least 5” beyond
the front of the cabinets. Cabinets installed above the cooktop must be no deeper than 13”.
Anti-Tip Bracket
Kit Included
B
A
C
From
combustible
walls above
cooking
surface either
side
36s
D (depth
with door
open)
40
1
ø
2
s
height
5s
30s min.
15s min.
13s
max.
36s max.
2
1
ø
2
s
Wall Mounted
2
1
ø
4
s
Floor
Cord
Outlet box
Wall
2s
Recommended acceptable electrical outlet
area. Orient the electrical receptacle so the
length is parallel to the floor.
Surface
mount
outlet
Models A B C D
20s Wide 20
1
ø
3
s 20
3
ø
8
s 2s 41s
24s Wide 24
1
ø
3
s 24
3
ø
8
s 2s 41s
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Installation Instructions

BEFORE YOU BEGINRead these instructions completely and carefully.• ,03257$17³ Save these instructions for local inspector’s use.• ,03257$17³ Obse

Page 2 - Wire cover

3 ELECTRICAL REQUIREMENTSWARNING: This appliance must be properly grounded.WARNING: All new constructions, mobile homes, recreational vehicles and in

Page 3 - Fire hazard

5 3-WIRE INSTALLATION (GROUND IS THROUGH THE NEUTRAL WIRE)WARNING: Shock HazardThe neutral wire and ground strap must be connected as shown below for

Page 4

9 LEVEL THE RANGEWARNING: Never completely remove the leveling leg as the range will not be secured to the anti-tip device properly.MODELS WITH STOR

Page 5 - Instrucciones de instalación

2 CÓMO PREPARAR LA ABERTURA (PARA USO EN EL INTERIOR SOLAMENTE)Ver ilustraciones con todas las dimensiones de empotrado y de espacio. La cocina puede

Page 6

3 REQUERIMIENTOS ELÉCTRICOSADVERTENCIA: Esta unidad debe contar con una adecuada conexión a tierra. ADVERTENCIA: Todas las construcciones nuevas, cas

Page 7 - Riesgo de incendio

31-10980 08-14 GE5 INSTALACIÓN DE TRES (3) ALAMBRES (LA CONEXIÓN A TIERRA SE REALIZA A TRAVÉS DEL CABLE NEUTRO)ADVERTENCIA: Riesgo de Descarga

Page 8 - ADVERTENCIA

8 INSTALACIÓN DE DISPOSITIVO ANTI-VOLCADURASA fin de reducir el riesgo de inclinar la cocina, ésta deberá estar asegurada con un soporte anti volcadur

Comments to this Manuals

No comments